18 deg Cone for Stability Check
18 deg Cone for Stability Check
0,00 $ USD
Instructions: Align the tip of the cone with center of mass of your assembly.
The feet or wheels or your assembly must be outside the volume of the cone.
If it is not, the equipment will be more likely to tip over.
Refer to this blog post for details: https://vention.io/blogs/calculating-the-stability-of-your-equipment-89
0 Kommentare
Alle Teile verfügbar
Sie wissen nicht, wo Sie anfangen sollen?
Holen Sie sich Hilfe von einem ExpertenTechnical Specifications
Spec Attribute | Spec Value |
---|---|
Designnummer | ME-OT-347590 v1 |
Gewicht | 0.0 kg |
Maße (L x W x H) | 0 x 0 x 0 mm |
Einzelpreis | 0,00 $ USD |
Anwendungsfall | Other Equipment |
Anwendung | Other |
Montagezeit | 0:00 |
Belege
Technische Zeichnungen
Technische Dokumente
Rechner
Technical Specifications
Spec Attribute | Spec Value |
---|---|
Designnummer | ME-OT-347590 v1 |
Gewicht | 0.0 kg |
Maße (L x W x H) | 0 x 0 x 0 mm |
Einzelpreis | 0,00 $ USD |
Anwendungsfall | Other Equipment |
Anwendung | Other |
Montagezeit | 0:00 |
Belege
Technische Zeichnungen
Technische Dokumente
Rechner
Feedback zur Gestaltung