18 deg Cone for Stability Check
18 deg Cone for Stability Check
0,00 $ USD
Instructions: Align the tip of the cone with center of mass of your assembly.
The feet or wheels or your assembly must be outside the volume of the cone.
If it is not, the equipment will be more likely to tip over.
Refer to this blog post for details: https://vention.io/blogs/calculating-the-stability-of-your-equipment-89
0 Commentaires
Toutes les composantes disponibles
Vous ne savez pas par où commencer ?
Obtenir l'aide d'un expertTechnical Specifications
Spec Attribute | Spec Value |
---|---|
Numéro de conception | ME-OT-347590 v1 |
Poids | 0.0 kg |
Dimensions (L x W x H) | 0 x 0 x 0 mm |
Prix Unitaire | 0,00 $ USD |
Cas d'utilisation | Other Equipment |
Application | Other |
Temps d'assemblage | 0:00 |
Documents Justificatifs
Dessins Techniques
Documents Techniques
Calculatrices
Technical Specifications
Spec Attribute | Spec Value |
---|---|
Numéro de conception | ME-OT-347590 v1 |
Poids | 0.0 kg |
Dimensions (L x W x H) | 0 x 0 x 0 mm |
Prix Unitaire | 0,00 $ USD |
Cas d'utilisation | Other Equipment |
Application | Other |
Temps d'assemblage | 0:00 |
Documents Justificatifs
Dessins Techniques
Documents Techniques
Calculatrices
Commentaires sur la conception