Datasheet
Updated: Tuesday, August 10th 2021
MachineMotion 2 One-Drive Datasheet
Introduction
MachineMotion v2 One-Drive datasheet contains detailed technical specifications, such as: functional pinout, input & outputs, specifications, input / output capabilities by model, electronics & embedded software specifications and unit dimensions.
Overview
MachineMotion v2 One-Drive is a plug and play industrial controller that contains the necessary infrastructure to execute motion and control applications through a library of modular components. Equipment powered by MachineMotion v2 One-Drive can be programmed through MachineLogic – Vention’s code-free visual sequence editor – or through Vention’s Python SDK.
Features
- Control one 250 W high performance step-servos with accurate and automatic position adjustments. This allows the actuator to always reach the user-specified position, thanks to a built-in encoder that enables the motors to operate in closed control loops.
- Step-servo junction box with simple cabling, where the brake, home and end-stop sensors can be directly wired to the motor.
- Status light on servo motors and controller for quick diagnostics
- Loaded with code-free software including:
- Control Center
- MachineLogic
- Python
- Open source development tools including:
- Cloud 9 IDE
- Javascript
- Operator mode
- Manual joggers
- The MachineMotion 2 One-Drive controller is certified by CSA for UL61800-5
- IP30 rated enclosure for industrial applications, with active cooling and replaceable filters
- Connect digital I/O and analog modules to control I/O devices
- Single continuous flex cable to power an actuator, sensors and power-off brake
- Plug and play with all Vention actuators
- Native support for Universal Robots with URcap
- Plug and play safety system with physical and software reset
- Directly connect peripherals locally or remotely using the teach pendant, keyboard, mouse, and monitor
Applications
- Automated equipment
- Cartesian robot
- Functional and reliability test benches
- Conveyor system
- Inspection cells
Electrical Specifications
| Certifications | |
| Electrical Safety | CSA |
| Applicable Standards | UL61800-5 |
| Power Port | |
| Name | POWER |
| Rated Voltage | 85 to 264 VAC |
| Rated Current | 3A @ 120 VAC |
| Typical Current | 1.5A @ 120 VAC |
| Typical Power | 250 W |
| Standby Current | 0.7 A (@ power factor 0.55) |
| Standby Power | 84 W |
| Emergency Mode Current | 0.4 A (@ power factor 0.3) |
| Emergency Mode Power | 48 W |
| Connector | NEMA C14 |
| Power Cord 120 V | 3.00m, NEMA 5-15P to IEC 320-C13, SJT |
| Power Cord 230 V | 2.5m, CEE 7/7, Right Angle to IEC 320-C13 H05VV-F |
| Drive Ports | |
| Name(s) | DRIVE 1 |
| Motor Type | Servo-Stepper |
| Output Peak Voltage | 50 V |
| Maximum Output Current | 10 A |
| Maximum Output Power | 350 W |
| Phase Current Peak | 0 - 10 A |
| Phase Current Adjustment (Internal) | Software controlled |
| Control Interface (Internal) | CAN/(Step-Dir-Enable) Signals |
| Motor Drivers Certification | CE |
| Connector | M23 Amphenol Sine |
| Pin 1 | 24 V |
| Pin 2 | 0 V |
| Pin 3 | motor phase A+ |
| Pin 4 | motor phase A- |
| Pin 5 | motor phase B+ |
| Pin 6 | motor phase B- |
| Pin 7 | Encoder A+ |
| Pin 8 | Encoder A- |
| Pin 9 | Encoder B+ |
| Pin 10 | Encoder B- |
| Pin 11 | Encoder Index+ |
| Pin 12 | Encoder Index- |
| Pin 13 | NC |
| Pin 14 | NC |
| Pin 15 | Home/End Limit Switch S1 |
| Pin 16 | Home/End Limit Switch S2 |
| Pin 17 | 24V Safety Switched |
| Control (1,2,3,4) Ports | |
| Name(s) | Control 1, Control 2, Control 3, Control 4 |
| Connectivity Type | Communication |
| Connectivity Physical Layer | CAN/RS485 |
| Connector | M12, female, 8-pin, A-Keyed |
| Pin 1 | 24 V |
| Pin 2 | 0 V |
| Pin 3 | RS485 A |
| Pin 4 | RS485 B |
| Pin 5 | CAN H |
| Pin 6 | CAN L |
| Pin 7 | NC |
| Pin 8 | 24V Safety Switched |
| To PC Port | |
| Name(s) | To PC |
| Connectivity Type | Ethernet |
| Connectivity Physical Layer | IEEE 802.3, Ethernet |
| Connector | RJ45 |
| LAN Ports | |
| Name(s) | LAN 1, LAN 2 |
| Connectivity Type | Ethernet |
| Connectivity Physical Layer | IEEE 802.3, Ethernet |
| Connector | RJ45 |
| USB Ports | |
| Name(s) | USB 1, USB 2 |
| Connectivity Type | USB |
| Connectivity Physical Layer | USB 2.0 |
| Connector | USB-A 2.0 |
| HDMI Ports | |
| Name(s) | HDMI |
| Connectivity Type | HDMI |
| Connectivity Physical Layer | HDMI |
| Connector | HDMI Type A |
| Safety In Port | |
| Name(s) | Safety In |
| Type | Redundant Dry Contacts + Reset |
| Connector | M12, female, 12-pin, A-Keyed |
| Pin 1 | 24 V |
| Pin 2 | 0 V |
| Pin 3 | Channel 1 Contact 1 |
| Pin 4 | Channel 1 Contact 2 |
| Pin 5 | Channel 2 Contact 1 |
| Pin 6 | Channel 2 Contact 2 |
| Pin 7 | Reset Contact 1 |
| Pin 8 | Reset Contact 2 |
| Pin 9 | NC |
| Pin 10 | NC |
| Pin 11 | NC |
| Pin 12 | NC |
| Safety Out Port | |
| Name(s) | Safety Out |
| Type | Redundant Dry Contacts + Reset |
| Connector | M12, female, 12-pin, A-Keyed |
| Pin 1 | 24 V |
| Pin 2 | 0 V |
| Pin 3 | Channel 1 Contact 1 |
| Pin 4 | Channel 1 Contact 2 |
| Pin 5 | Channel 2 Contact 1 |
| Pin 6 | Channel 2 Contact 2 |
| Pin 7 | Reset Contact 1 |
| Pin 8 | Reset Contact 2 |
| Pin 9 | NC |
| Pin 10 | NC |
| Pin 11 | NC |
| Pin 12 | NC |
| Pendant Port | |
| Name(s) | PENDANT |
| Connectivity Type | Ethernet (PoE) |
| Connectivity Physical Layer | IEEE 802.3, Ethernet |
| Connector | M12, 12-pin, A-Key |
| Pin 1 | 24 V |
| Pin 2 | 0 V |
| Pin 3 | Pendant EM C 1+ |
| Pin 4 | Pendant EM C 1- |
| Pin 5 | Pendant EM C 2+ |
| Pin 6 | Pendant EM C 2- |
| Pin 7 | NC |
| Pin 8 | NC |
| Pin 9 | Ethernet TX+ |
| Pin 10 | Ethernet TX- |
| Pin 11 | Ethernet RX+ |
| Pin 12 | Ethernet RX+ |
| Ethernet Port | |
| Name(s) | ETHERNET |
| Connectivity Type | Standard Ethernet |
| Physical Layer | IEEE 802.3, Ethernet |
| Connector | RJ45, 8p8c |
| Pin 1 | NC |
| Pin 2 | TX+ |
| Pin 3 | TX- |
| Pin 4 | RX+ |
| Pin 5 | RX- |
| Pin 6 | NC |
| Pin 7 | NC |
| Pin 8 | NC |
| Default Ethernet or 192.168.7.2 Port | |
| Name | DEFAULT ETHERNET or 192.168.7.2 |
| Status | Unused |
Embedded & Computing Specifications
| Single Board Computer | |
| Processor | TI AM5729 |
| OS | Debian 10 |
| Memory | 32GB SD-micro |
| Certification | CE |
| Motion Controller | |
| Processor | Natotec CL4 |
| Interface | CAN |
| Protocol | G-code |
| Fieldbus Compatible Modules | |
| Digital IO Module | CE-MD-001-0001 |
| Analog IO Module | CE-MD-003-0000 *available soon |
| Push-Button Module | CE-MD-004-0000 *available soon |
Safety Specifications
| Implementation | |
| Safety Rating | Suited up to SIL3, Performance Level e, CAT 4 |
| Safety Relay | |
| Manufacturer | Dold |
| Model Number | LG5925-48-61-24 |
| Type | Emergency Stop |
| Safety Relay Data - Values per EN ISO 13849-1 | |
| Category | 4 (EN 954-1) |
| Performance Level | PLe |
| MTTFd | > 100 years |
| DCavg | 99% |
| Safety Relay Data - Values per IEC/EN 62061 / IEC/EN 61508 | |
| SIL CL | 3 (IEC/EN 62061) |
| SIL | 3 (IEC/EN 61508) |
| HFT (hardware failure tolerance) | 1 |
| DCavg | 99% |
| SFF | 99.70% |
| PFHD | 2.66E-10 h<>-1 |
Vention ControlCenter Software
MachineMotion™ comes with pre-loaded control and machine operations software – all of which is accessible through the MachineMotion™ pendant or via computer with a USB or Ethernet connection.
Application Launcher
- Launch MachineLogic Applications
- Launch Python Applications
- Configure programs in auto-launch mode (executes automatically after power-ON)
Manual Control
- Send motion commands to actuators
- Configure speed, acceleration and direction
- Monitor the state of end-of-travel sensors and connected control devices
MachineLogic
- Create automation programs in a simple graphical interface
Network Configuration
- Configure the Ethernet adapter of the MachineMotion controller
Software & Communication Protocol Specifications
| Available Control API |
| Python |
| Communication Protocol for Ethernet Adapter |
| web-socket |
| Communication Protocol for Filedbus |
| MQTT |
Physical Unit
Functional Pinout
Unit Dimensions
Compatible Hardware
Plug and Play Automation Components
| MachineMotionTM Pendant CE-TP-004-0001 
|
M18 Inductive Proximity Sensor CE-SN-004-0001 
|
| Digital I/O Module CE-MD-001-0001 
|
Power-Off Brake MO-PT-002-0001 
|
| NEMA34 Servo Motors MO-SM-01X-0000 
|
Emergency Stop and Reset Module CE-SA-007-0000 
|