Rev2 - Operator Manual Conveyor Inspection System
Rev2 - Operator Manual Conveyor Inspection System
By:
$11,331.51 USD
Designed for an operator to place a part, fixture or product on the left side of the conveyor. Conveyor would index product to the camera inspection FOV. a sensor will stop the conveyor for inspection, camera will Process a Pass/Fail to the LED Tower and index the product to the operator on the right side. The Rev 2 conveyor height from floor is 29''
0 comments
Not all parts available
Not sure where to start?
Get help from an expertTechnical Specifications
| Spec Attribute | Spec Value |
|---|---|
| Design number | ME-OT-139970 v10.16.18.1 |
| Weight | 101.9 kg |
| Dimensions (L x W x H) | 1067 x 807 x 1351 mm |
| Unit price | $11,331.51 USD |
| Use case | Other Equipment |
| Application | Other |
| Assembly time | 10:14 |
Supporting Documents
Technical Drawings
Technical Documents
Calculators
Technical Specifications
| Spec Attribute | Spec Value |
|---|---|
| Design number | ME-OT-139970 v10.16.18.1 |
| Weight | 101.9 kg |
| Dimensions (L x W x H) | 1067 x 807 x 1351 mm |
| Unit price | $11,331.51 USD |
| Use case | Other Equipment |
| Application | Other |
| Assembly time | 10:14 |
Supporting Documents
Technical Drawings
Technical Documents
Calculators
Design Feedback